Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I recently converted a couple of CB's to different bands: one to 10 meters
and the other to 12. Although both have effective noise blankers (they are Cobra/ Uniden CB's), I'm wondering if it's possible to make the blankers adjustable in any way? When aligning them, two Toko (or similar) inductors on the board have to be adjusted for minimal noise but of course I wouldn't be able to adjust these on the road since they are internal. Thoughts or ideas? Thanks, Bill |
#2
![]() |
|||
|
|||
![]()
Are you sure that inductors you talking about are in audio circuit
are they are in RF gain circuit some CBs come built in noise limiter? "Bill Peters" wrote in message ... I recently converted a couple of CB's to different bands: one to 10 meters and the other to 12. Although both have effective noise blankers (they are Cobra/ Uniden CB's), I'm wondering if it's possible to make the blankers adjustable in any way? When aligning them, two Toko (or similar) inductors on the board have to be adjusted for minimal noise but of course I wouldn't be able to adjust these on the road since they are internal. Thoughts or ideas? Thanks, Bill |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
WTB: Noise Blanker for KWM/HF-380 | Swap | |||
Best noise blanker | Equipment | |||
Best noise blanker | Equipment | |||
Best noise blanker | Equipment | |||
FS: Drake TR-4 w/ noise blanker | Boatanchors |