| Home |
| Search |
| Today's Posts |
|
#1
July 27th 03, 03:24 PM
|
|||
|
|||
Control PLL via computer
Hello,
I'm building a VHF receiver and I would like to include a PLL circuit to control the VCO. I've never done it before, so I would like to use the LMX2337 because I've a lot of doc about it. I intend to to connect it to my computer, but I don't know to send data to it. Do you know if there are programs to do it ? or could you help me ? Thanks a lot. |
|
#2
July 27th 03, 03:27 PM
|
|||
|
|||
|
|
|
#3
July 27th 03, 03:27 PM
|
|||
|
|||
|
|
|
#4
July 27th 03, 07:20 PM
|
|||
|
|||
|
"Damien Teney" wrote in message ... Hello, I'm building a VHF receiver and I would like to include a PLL circuit to control the VCO. I've never done it before, so I would like to use the LMX2337 because I've a lot of doc about it. I intend to to connect it to my computer, but I don't know to send data to it. Do you know if there are programs to do it ? or could you help me ? Nat Semi has a program for doing this that you can download, called Codeloader: http://www.national.com/appinfo/wire...ader2setup.exe Leon -- Leon Heller, G1HSM http://www.geocities.com/leon_heller |
|
#5
July 27th 03, 07:20 PM
|
|||
|
|||
|
"Damien Teney" wrote in message ... Hello, I'm building a VHF receiver and I would like to include a PLL circuit to control the VCO. I've never done it before, so I would like to use the LMX2337 because I've a lot of doc about it. I intend to to connect it to my computer, but I don't know to send data to it. Do you know if there are programs to do it ? or could you help me ? Nat Semi has a program for doing this that you can download, called Codeloader: http://www.national.com/appinfo/wire...ader2setup.exe Leon -- Leon Heller, G1HSM http://www.geocities.com/leon_heller |
|
#6
July 27th 03, 09:56 PM
|
|||
|
|||
|
Wow cool ! That's exactly what I need. Thank you for the link ;-)
Nat Semi has a program for doing this that you can download, called Codeloader: http://www.national.com/appinfo/wire...ader2setup.exe Leon Heller, G1HSM http://www.geocities.com/leon_heller |
|
#7
July 27th 03, 09:56 PM
|
|||
|
|||
|
Wow cool ! That's exactly what I need. Thank you for the link ;-)
Nat Semi has a program for doing this that you can download, called Codeloader: http://www.national.com/appinfo/wire...ader2setup.exe Leon Heller, G1HSM http://www.geocities.com/leon_heller |
|
#8
July 28th 03, 05:20 PM
|
|||
|
|||
|
In article ,
says... Wow cool ! That's exactly what I need. Thank you for the link ;-) Also see http://www.qsl.net/ke5fx/synth.html -- I've got a lot of C control code for the Analog and National PLL chips up there, compatible with both Win32 and Atmel. -- jm ------------------------------------------------------ http://www.qsl.net/ke5fx Note: My E-mail address has been altered to avoid spam ------------------------------------------------------ |
|
#9
July 28th 03, 05:20 PM
|
|||
|
|||
|
In article ,
says... Wow cool ! That's exactly what I need. Thank you for the link ;-) Also see http://www.qsl.net/ke5fx/synth.html -- I've got a lot of C control code for the Analog and National PLL chips up there, compatible with both Win32 and Atmel. -- jm ------------------------------------------------------ http://www.qsl.net/ke5fx Note: My E-mail address has been altered to avoid spam ------------------------------------------------------ |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Fixing a computer power supply | Boatanchors | |||
| WTD: YASEU G-800SDX ROTOR CONTROL | Equipment | |||
| WTD: YASEU G-800SDX ROTOR CONTROL | Equipment | |||
| Antenna Rotor Control Burnt Up | Boatanchors | |||
| FS: Mappit A4F - Fanless, DC powered computer | Boatanchors | |||
Linear Mode
