Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I have a DSS receiver that I run into a modulator and then can use the
Satellite all over the house as if it was cable. The problem is we need to extend the IR from the remote control. We are now using some RF units from RCA and while they worked well for a few years, over time they are drifting off frequency. It seems to me it would make more sense to build some sort of 'device' to send the IR signals over the coax and then pull it out at the receiver end. Anyone have any suggestion or experience with building such an animal? Joel AG4QC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
Control signals for Kenwood remote antenna tuner? | Equipment | |||
Control signals for Kenwood remote antenna tuner? | Equipment | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Remote Control signals over coax. | Homebrew |