Look up Hosfelt Electronics. They carry those small lamps I believe. I bought some for my 212RH and I believe it was them I bought them from. You want the "Microwheat" bulbs.. I think that is what they are called. Or maybe mini wheat as the wheats are small in their own right. They are out there to be found though from regular parts places. SM.
"Claudia & Reed Park" wrote in message ...

JGBOYLES wrote:

Besides, their parts were and always have been complete crap anyways, so not
a great loss really...
Larry, I have been buying electronic components from Radio Shack for 40 years,
and I can't say I got any that were complete c***. They all worked, isn't that
what you get them for?
Radio Shack doesn't manufacture any of the parts they sell, they repackage
OEM parts and resell. They cost more, and the people working there know little
or nothing about the parts section. But the parts work.
As another poster pointed out, they are mighty handy for the odd part to meet
some deadline, or if you are just trying to finish your latest weekend creation
and need a 1N4007, and a 10k 1/4 watt in a hurry. I would never use them as
the major parts supplier for anything but the smallest of projects. I would
consider them getting out of the parts business a loss.
73 Gary N4AST

Well.
Here in Canada, they got out of the small parts business years ago. HOWEVER,
the parts can still be bought on-line at RatShack (as they are known here). But
who wants to buy just one IC or transistor or resistor to finish that project on line.
Now, would you believe, they are finally starting to stock a few small parts once again ?
I needed two 1N34A diodes last week to repair an antenna tuner for a friend.
My stock was nil, so on the off chance, I called Radio Shack. Sure enough, they
are back on the shelves again, at 10 for about 4 bucks including the 15 % tax.
What I can't find locally is two small dial lamps to replace the ones in a Yaesu
FT-212RH. Radio shack has 12 volt bulbs, Yaesu used 9 volt bulbs. No hobby
type stores here stock anything other than 14 volt bulbs.

In Canada, it's very hard top get small quantities of small parts even when you
can find someone that has what you need. I needed 7 zener diodes to do a project
and had to buy a minimum order of 500. Good thing they were only 7 cents each.

7 3
Reed - VE1NU

---

Looking for information on Marconi SMR-3 and
Northern Electric R8119A receivers of WW2.

Reed, Digikey has a warehouse in Winnapeg that they service Canada
from, also a catalog with Canadian pricing on line.

http://dkc1.digikey.com/ca/digihome.html

There is a $6.50 handling charge on orders less than $32 something
bucks, plus shipping of course. I've used them a few times, they ship
purolater, it arrives within a few days. of course, you could drive
down to Dartmouth & give your buisness to RAE or Jentronics but they
probably won't have the stuff you want in stock anyhow.

Not the perfect solution but this is the world we live in -


On Tue, 13 Jan 2004 17:20:01 GMT, Claudia & Reed Park
wrote:


*Snip*


In Canada, it's very hard top get small quantities of small parts even when you
can find someone that has what you need. I needed 7 zener diodes to do a project
and had to buy a minimum order of 500. Good thing they were only 7 cents each.

7 3
Reed - VE1NU

---

Looking for information on Marconi SMR-3 and
Northern Electric R8119A receivers of WW2.

Reed, Digikey has a warehouse in Winnapeg that they service Canada
from, also a catalog with Canadian pricing on line.

http://dkc1.digikey.com/ca/digihome.html

There is a $6.50 handling charge on orders less than $32 something
bucks, plus shipping of course. I've used them a few times, they ship
purolater, it arrives within a few days. of course, you could drive
down to Dartmouth & give your buisness to RAE or Jentronics but they
probably won't have the stuff you want in stock anyhow.

Not the perfect solution but this is the world we live in -


On Tue, 13 Jan 2004 17:20:01 GMT, Claudia & Reed Park
wrote:


*Snip*


In Canada, it's very hard top get small quantities of small parts even when you
can find someone that has what you need. I needed 7 zener diodes to do a project
and had to buy a minimum order of 500. Good thing they were only 7 cents each.

7 3
Reed - VE1NU

---

Looking for information on Marconi SMR-3 and
Northern Electric R8119A receivers of WW2.

Scanman wrote:

Look up Hosfelt Electronics. They carry those small lamps I believe. I bought
some for my 212RH and I believe it was them I bought them from. You want the
"Microwheat" bulbs.. I think that is what they are called. Or maybe mini wheat
as the wheats are small in their own right. They are out there to be found
though from regular parts places. SM.

Just got back inside form the minus 42 (wind chill temperature) degree outside.
Tried a local electronic repair place in town and found the lamps I was looking
for.
Also found that they sell other electronic stuff. Nothing on display, one has to
ask
at the front counter, but what the heck. At least I now know they have parts
and will sell in lots of one, or more. :-)

Hard to believe just how small some lamps can get. Grain of wheat, grain
of rice and grain of sand. The one in my digital watch is so small it looks like

a swollen spot on a piece of human hair.

7 3 to all
Reed - VE1NU

---

Looking for information on Marconi SMR-3 and
Northern Electric R8119A receivers of WW2.

Yes, it is amazing - the sizes - isn't it. It had been a while since I ordered those bulbs and I only needed them that one time, so I couldn't recall the exact name. Matter of fact, because they had burned out so soon, I think I bought 3 sets. I figured that would be about the life of the radio - which I had won at a Hamfest. It seems to me, that must be an inherent defect with the 212 RH or at least some of the models. I know several who had to replace them after a short period of ownership. I don't think my radio was 2 years old. And certainly, when I was away at work or whatever, it wasn't on all that time. So it "seems" to me, the run of bulbs they had were apparently defective. Mine that I installed have been in there since. I feel bad for a friend of mine, he sent his to Yaesu to have them replaced. Ouch! Before someone may say mobile abuse, mine was used on a desk. They still burned out probably far faster than they should have. I'm not aware of any "life" of those as compared to say lights for your home with say a 1000 hour life. Glad you were able to find a parts source nearby, it sure helps! SM
"Claudia & Reed Park" wrote in message ...

Scanman wrote:

Look up Hosfelt Electronics. They carry those small lamps I believe. I bought some for my 212RH and I believe it was them I bought them from. You want the "Microwheat" bulbs.. I think that is what they are called. Or maybe mini wheat as the wheats are small in their own right. They are out there to be found though from regular parts places. SM.
Just got back inside form the minus 42 (wind chill temperature) degree outside.
Tried a local electronic repair place in town and found the lamps I was looking for.
Also found that they sell other electronic stuff. Nothing on display, one has to ask
at the front counter, but what the heck. At least I now know they have parts
and will sell in lots of one, or more. :-)
Hard to believe just how small some lamps can get. Grain of wheat, grain
of rice and grain of sand. The one in my digital watch is so small it looks like
a swollen spot on a piece of human hair.

7 3 to all
Reed - VE1NU

---

Looking for information on Marconi SMR-3 and
Northern Electric R8119A receivers of WW2.

(Your post is in HTML, and my browser won't allow me to quote your
message so I had to copy and paste it)

Scanman wrote

Yes, it is amazing - the sizes - isn't it. It had been a while since I
ordered those bulbs and I only needed them that one time, so I couldn't
recall the exact
name. Matter of fact, because they had burned out so soon, I think I
bought 3 sets. I figured that would be about the life of the radio -
which I had won at
a Hamfest. It seems to me, that must be an inherent defect with the 212
RH or at least some of the models. I know several who had to replace
them after
a short period of ownership. I don't think my radio was 2 years old. And
certainly, when I was away at work or whatever, it wasn't on all that
time. So it
"seems" to me, the run of bulbs they had were apparently defective. Mine
that I installed have been in there since. I feel bad for a friend of
mine, he sent
his to Yaesu to have them replaced. Ouch! Before someone may say mobile
abuse, mine was used on a desk. They still burned out probably far
faster
than they should have. I'm not aware of any "life" of those as compared
to say lights for your home with say a 1000 hour life. Glad you were
able to find
a parts source nearby, it sure helps! SM



Did you ever think about adding a resistor, or a couple diodes to
reduce the voltage a little? It will extend the life of the bulb without
a big change in brightness.
--
We now return you to our normally scheduled programming.

Take a look at this little cutie! ;-)
http://home.earthlink.net/~mike.terrell/photos.html

Michael A. Terrell
Central Florida

If you were asking me, I believe I checked the voltage and found it to be
reasonable. It has been a long time since I've changed them out. As I said,
the new ones have been in there since! But I know what you're talking about,
I've done likewise in a few other types of radios! I can't speak for the
others' whose radios I've heard of with the same problem. SM

"Michael A. Terrell" wrote in message
...
(Your post is in HTML, and my browser won't allow me to quote your
message so I had to copy and paste it)

Scanman wrote

Yes, it is amazing - the sizes - isn't it. It had been a while since I
ordered those bulbs and I only needed them that one time, so I couldn't
recall the exact
name. Matter of fact, because they had burned out so soon, I think I
bought 3 sets. I figured that would be about the life of the radio -
which I had won at
a Hamfest. It seems to me, that must be an inherent defect with the 212
RH or at least some of the models. I know several who had to replace
them after
a short period of ownership. I don't think my radio was 2 years old. And
certainly, when I was away at work or whatever, it wasn't on all that
time. So it
"seems" to me, the run of bulbs they had were apparently defective. Mine
that I installed have been in there since. I feel bad for a friend of
mine, he sent
his to Yaesu to have them replaced. Ouch! Before someone may say mobile
abuse, mine was used on a desk. They still burned out probably far
faster
than they should have. I'm not aware of any "life" of those as compared
to say lights for your home with say a 1000 hour life. Glad you were
able to find
a parts source nearby, it sure helps! SM



Did you ever think about adding a resistor, or a couple diodes to
reduce the voltage a little? It will extend the life of the bulb without
a big change in brightness.
--
We now return you to our normally scheduled programming.

Take a look at this little cutie! ;-)
http://home.earthlink.net/~mike.terrell/photos.html

Michael A. Terrell
Central Florida

Scanman wrote:

If you were asking me, I believe I checked the voltage and found it to be
reasonable. It has been a long time since I've changed them out. As I said,
the new ones have been in there since! But I know what you're talking about,
I've done likewise in a few other types of radios! I can't speak for the
others' whose radios I've heard of with the same problem. SM

30 years ago I was a broadcast engineer at a B&W TV station. The
projector bulbs in the RCA film chain were rated for a 20 hour life at
120 volts, and they were pretty close to that figure. I couldn't depend
on a steady supply, so I adjusted the Variac in each project to run them
at 100 volts, and got over 300 hours out of every bulb after that. The
color temperature was out of spec, but you couldn't tell, because
everything was B&W.

--
We now return you to our normally scheduled programming.

Take a look at this little cutie! ;-)
http://home.earthlink.net/~mike.terrell/photos.html

Michael A. Terrell
Central Florida

Hard to believe just how small some lamps can get. Grain of wheat, grain
of rice and grain of sand. The one in my digital watch is so small it looks like
a swollen spot on a piece of human hair.
==============================
When having to replace 'tiny bulbs' consider conversion to LEDs . These are readily available (also the high intensity ones).
Although you might have to add a resistor ,they will last forever ...........or at least a lifetime.

Frank GM0CSZ / KN6WH

Howard Eisenhauer wrote:

Reed, Digikey has a warehouse in Winnapeg that they service Canada
from, also a catalog with Canadian pricing on line.

http://dkc1.digikey.com/ca/digihome.html

Thanks Howard.

There is a $6.50 handling charge on orders less than $32 something
bucks, plus shipping of course. I've used them a few times, they ship
purolater, it arrives within a few days.

Purolator is most acceptable. Have always had good experiences with
both Purolator and the Post Office. Now, UPS is something else.

of course, you could drive
down to Dartmouth & give your buisness to RAE or Jentronics but they
probably won't have the stuff you want in stock anyhow.

They are also 3 hours away from here. Hard to believe, that at one time,
CamGuard and RAE were both in Moncton which is only about 10 minutes
from where I live (at rush hour).

Not the perfect solution but this is the world we live in -

You are so right.


7 3
Reed - VE1NU

---

Looking for information on Marconi SMR-3 and
Northern Electric R8119A receivers of WW2.

Thanks to all that have made comments and replies. Your input
has been appreciated.