I need some of this stuff for antenna assembly. Anyone know where to get
it?

For those who don't know what it is, it's a paste you get in a little can or
tube that you smear on mating metals to avoid having them stick together
after exposure to the elements. It's also used for soldering irons to make
replacing tips easier.

I think it's molybdenum disulfide.

73, Bob

"Bob" wrote in message
...
I need some of this stuff for antenna assembly. Anyone know where to get
it?

For those who don't know what it is, it's a paste you get in a little can
or
tube that you smear on mating metals to avoid having them stick together
after exposure to the elements. It's also used for soldering irons to
make
replacing tips easier.

I think it's molybdenum disulfide.

73, Bob



Bob:

http://bosunsupplies.com carries it (well,a t least one version thereof).
Bosun Supply is an excellent source for all sorts of stuff useful in ham
radio. Besides, when I order from them, I can pretend I own a 40 ft sloop.
grin

73

Paul AB0SI

"Bob" wrote in message
...
I need some of this stuff for antenna assembly. Anyone know where to get
it?

For those who don't know what it is, it's a paste you get in a little can
or
tube that you smear on mating metals to avoid having them stick together
after exposure to the elements. It's also used for soldering irons to
make
replacing tips easier.

I think it's molybdenum disulfide.

73, Bob



Bob:

http://bosunsupplies.com carries it (well,a t least one version thereof).
Bosun Supply is an excellent source for all sorts of stuff useful in ham
radio. Besides, when I order from them, I can pretend I own a 40 ft sloop.
grin

73

Paul AB0SI

Any electrical parts place sells it. It is commonly known as Penetrox
or inhibitor paste. It is primarily used for aluminum wire contact with
terminal strips.

Dick K7RNZ

wrote:
"Bob" wrote in message
...

I need some of this stuff for antenna assembly. Anyone know where to get
it?

For those who don't know what it is, it's a paste you get in a little can

or

tube that you smear on mating metals to avoid having them stick together
after exposure to the elements. It's also used for soldering irons to

make

replacing tips easier.

I think it's molybdenum disulfide.

73, Bob




Bob:

http://bosunsupplies.com carries it (well,a t least one version thereof).
Bosun Supply is an excellent source for all sorts of stuff useful in ham
radio. Besides, when I order from them, I can pretend I own a 40 ft sloop.
grin

73

Paul AB0SI

Any electrical parts place sells it. It is commonly known as Penetrox
or inhibitor paste. It is primarily used for aluminum wire contact with
terminal strips.

Dick K7RNZ

wrote:
"Bob" wrote in message
...

I need some of this stuff for antenna assembly. Anyone know where to get
it?

For those who don't know what it is, it's a paste you get in a little can

or

tube that you smear on mating metals to avoid having them stick together
after exposure to the elements. It's also used for soldering irons to

make

replacing tips easier.

I think it's molybdenum disulfide.

73, Bob




Bob:

http://bosunsupplies.com carries it (well,a t least one version thereof).
Bosun Supply is an excellent source for all sorts of stuff useful in ham
radio. Besides, when I order from them, I can pretend I own a 40 ft sloop.
grin

73

Paul AB0SI

Two electronics stores and Home Depot didn't have it.

I finally found some at my auto parts store. I was told that Ham Radio
Outlet had it for $8 but I only paid $3 for a decent sized tube of the
stuff.

Thanks for your help, guys.

73, Bob

Two electronics stores and Home Depot didn't have it.

I finally found some at my auto parts store. I was told that Ham Radio
Outlet had it for $8 but I only paid $3 for a decent sized tube of the
stuff.

Thanks for your help, guys.

73, Bob

The stuff I use is from Lawson...its simular to CopperCoat, but its 80%
copper and works great. it takes very little...*maybe* a tablespoon full to
do a 4 element tribander, but after 4 or 5 years in a really bad salt
environment(Treasure Island in San Francisco bay), everything that had been
put together with this stuff came right apart when the screws were taken
out...anything that didn't get the antiseize was junk.
The stuff is expensive but worth every penny.

"Bob" wrote in message
...
Two electronics stores and Home Depot didn't have it.

I finally found some at my auto parts store. I was told that Ham Radio
Outlet had it for $8 but I only paid $3 for a decent sized tube of the
stuff.

Thanks for your help, guys.

73, Bob

The stuff I use is from Lawson...its simular to CopperCoat, but its 80%
copper and works great. it takes very little...*maybe* a tablespoon full to
do a 4 element tribander, but after 4 or 5 years in a really bad salt
environment(Treasure Island in San Francisco bay), everything that had been
put together with this stuff came right apart when the screws were taken
out...anything that didn't get the antiseize was junk.
The stuff is expensive but worth every penny.

"Bob" wrote in message
...
Two electronics stores and Home Depot didn't have it.

I finally found some at my auto parts store. I was told that Ham Radio
Outlet had it for $8 but I only paid $3 for a decent sized tube of the
stuff.

Thanks for your help, guys.

73, Bob

Automotive anti-seize is not the same as electrical.
Different purpose.
The automotive is to keep steel bolts from binding in aluminum, magnesium,
etc.
The electrical is to keep the coated materials from oxidizing while at the
same time ensuring good electrical contact.

--
Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

1-800-214-5779
972-870-0630 (local)


"Bob" wrote in message
...
Two electronics stores and Home Depot didn't have it.

I finally found some at my auto parts store. I was told that Ham Radio
Outlet had it for $8 but I only paid $3 for a decent sized tube of the
stuff.

Thanks for your help, guys.

73, Bob