LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #20   Report Post  
Old December 8th 03, 05:56 PM
Paul Burridge
 
Posts: n/a
Default

On Mon, 8 Dec 2003 15:29:59 +0000 (UTC), "Reg Edwards"
wrote:

[snip]

Hi Reg,

It so happens the uniformly distributed radiation resistance is exactly
twice the radiation resistance of a 1/2-wave dipole when concentrated at its
centre. So the uniformly distributed radiation resistance along a 1/2-wave
dipole is about 140 ohms. It cannot be measured. It can be calculated from
aerial dimensions. But best just to remember the approximate number 140. It
does depend to small extent on wire diameter and 'end-effect'.


It's annoying, because the tx output Z I'm trying to match is (by a
strange coincidence) 140 ohms! So a folded dipole would be ideal, I
guess. However - and it's a big *however* - I can't use one. I'm stuck
with a telescopic whip and a ground plane the size of a box of Swan
Vestas. I imagine the radiation resistance of such a non-ideal antenna
is pretty low, but until someone can gimme a ballpark figure for it, I
can't even begin to think about how to go about matching it. :-(


--

"I expect history will be kind to me, since I intend to write it."
- Winston Churchill


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiation Resistance & Efficiency Reg Edwards Antenna 23 January 10th 04 12:56 PM
Measuring radiation resistance Reg Edwards Antenna 11 December 13th 03 01:51 PM
50 Ohms "Real Resistive" impedance a Misnomer? Dr. Slick Antenna 255 July 30th 03 12:24 AM


All times are GMT +1. The time now is 04:04 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017