| Home |
| Search |
| Today's Posts |
|
#1
May 15th 04, 11:38 AM
|
|||
|
|||
Problems with LSB on IC706MKII
hello my friends
I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV |
|
#2
May 16th 04, 09:24 AM
|
|||
|
|||
|
Your injection frequency for the LSB mode probably isn't set correctly. You
didn't say how your audio sounded. If it is lacking low frequency response, the injection frequency is too far down on the filter slope. This would also account for the lower output power. I am not familiar with the innards of this rig..............it is possible that this could be corrected through a softkey menu. I am sure that this rig probably has a service menu mode. Pete "mongo" wrote in message ... On 15 May 2004 02:38:03 -0700, (chafik CN8JV) wrote: hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV AM , FM & RTTY Tx OK? Tried a CPU reset? Might be the PLL or main board. Service manual here; http://www.acc.umu.se/~nor/.manual/i...ice_Manual.pdf |
|
#3
May 16th 04, 09:24 AM
|
|||
|
|||
|
Your injection frequency for the LSB mode probably isn't set correctly. You
didn't say how your audio sounded. If it is lacking low frequency response, the injection frequency is too far down on the filter slope. This would also account for the lower output power. I am not familiar with the innards of this rig..............it is possible that this could be corrected through a softkey menu. I am sure that this rig probably has a service menu mode. Pete "mongo" wrote in message ... On 15 May 2004 02:38:03 -0700, (chafik CN8JV) wrote: hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV AM , FM & RTTY Tx OK? Tried a CPU reset? Might be the PLL or main board. Service manual here; http://www.acc.umu.se/~nor/.manual/i...ice_Manual.pdf |
|
#4
May 17th 04, 09:32 PM
|
|||
|
|||
|
I have a similar problem on USB. My receive audio dropped to barely
audible, and it sounded like people are talking from within a tin can. Got a friend on air, we compared AM, FM, CW USB and LSB, and I listened to RTTY. Everything received well except USB; LSB was a little off, I think. Transmit was fine (5-8, 5-9). Wrote ICOM, they had 'no ideas for troubleshooting.' Sent it back Friday (5/14) as it's still under warranty. Will let'cha know what ICOM says! 73 Joe N2LJD "chafik CN8JV" wrote in message m... hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV |
|
#5
May 17th 04, 09:32 PM
|
|||
|
|||
|
I have a similar problem on USB. My receive audio dropped to barely
audible, and it sounded like people are talking from within a tin can. Got a friend on air, we compared AM, FM, CW USB and LSB, and I listened to RTTY. Everything received well except USB; LSB was a little off, I think. Transmit was fine (5-8, 5-9). Wrote ICOM, they had 'no ideas for troubleshooting.' Sent it back Friday (5/14) as it's still under warranty. Will let'cha know what ICOM says! 73 Joe N2LJD "chafik CN8JV" wrote in message m... hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV |
|
#6
May 24th 04, 08:55 AM
|
|||
|
|||
|
"chafik CN8JV" wrote in message m... hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV Is the radio aligned properly? It's easy to check but if it's out of alignment, it needs to go to a radio shop to be fixed since proper calibration tools are needed. To hear if it's aligned right: - In AM mode, tune to a time station, such as CHU or WWV. - Now listen to the station in both LSB and USB modes. Is the sound of the clock tick the same, or close? If so the rig is aligned properly. If they don't sound the same, the rig is out of alignment. |
|
#7
May 24th 04, 08:55 AM
|
|||
|
|||
|
"chafik CN8JV" wrote in message m... hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV Is the radio aligned properly? It's easy to check but if it's out of alignment, it needs to go to a radio shop to be fixed since proper calibration tools are needed. To hear if it's aligned right: - In AM mode, tune to a time station, such as CHU or WWV. - Now listen to the station in both LSB and USB modes. Is the sound of the clock tick the same, or close? If so the rig is aligned properly. If they don't sound the same, the rig is out of alignment. |
|
#8
May 24th 04, 05:30 PM
|
|||
|
|||
|
"Bob M." wrote: "chafik CN8JV" wrote in message m... hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV Is the radio aligned properly? It's easy to check but if it's out of alignment, it needs to go to a radio shop to be fixed since proper calibration tools are needed. To hear if it's aligned right: - In AM mode, tune to a time station, such as CHU or WWV. - Now listen to the station in both LSB and USB modes. Is the sound of the clock tick the same, or close? If so the rig is aligned properly. If they don't sound the same, the rig is out of alignment. Don't try it on CHU. They transmit a carrier and USB only. Dave |
|
#9
May 24th 04, 05:30 PM
|
|||
|
|||
|
"Bob M." wrote: "chafik CN8JV" wrote in message m... hello my friends I am using icom 706 MKII on LSB, I get bad reports about audio and modulation quality, and the output power is too low. but on USB the output power is normal with good audio quality and modulation! any idea please thanks 73 CN8JV Is the radio aligned properly? It's easy to check but if it's out of alignment, it needs to go to a radio shop to be fixed since proper calibration tools are needed. To hear if it's aligned right: - In AM mode, tune to a time station, such as CHU or WWV. - Now listen to the station in both LSB and USB modes. Is the sound of the clock tick the same, or close? If so the rig is aligned properly. If they don't sound the same, the rig is out of alignment. Don't try it on CHU. They transmit a carrier and USB only. Dave |
|
#10
May 24th 04, 11:01 PM
|
|||
|
|||
|
"Bob M." ) writes:
To hear if it's aligned right: - In AM mode, tune to a time station, such as CHU or WWV. - Now listen to the station in both LSB and USB modes. Is the sound of the clock tick the same, or close? If so the rig is aligned properly. If they don't sound the same, the rig is out of alignment. I think this check won't work using CHU. CHU transmits partial carrier and upper sideband only, no LSB. Should be OK with WWV though. .... Martin VE3OAT |
| Reply |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| LSB problems with IC706MKII | Equipment | |||
| Problems with LSB on IC706MKII | Equipment | |||
| Problems with LSB on IC706MKII | Equipment | |||
| Need help: Radio in Car .. couple of problems | Equipment | |||
| Any RF problems with Mercury Sable/Ford Taurus? | Equipment | |||
Linear Mode
