Hi, I'm part of an amateur radio astronomy group at a college trying to
get a dish on top of a roof to work. We have much of the equipment, but
are having trouble putting it together, as far as how exactly to hook
everything up. Would this be the right newsgroup to post to? Thanks.

-brian

In article ,
says...
Hi, I'm part of an amateur radio astronomy group at a college trying to
get a dish on top of a roof to work. We have much of the equipment, but
are having trouble putting it together, as far as how exactly to hook
everything up. Would this be the right newsgroup to post to? Thanks.

-brian


Possibly; couldn't hurt to try. But if your questions are specific to
antenna work, you might have better luck in rec.radio.amateur.antenna.

-- jm

------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------

we currently have

ICOM 8500 Receiver
1420 MHz linear amp (company?)
21 cm(?) feed horn (assumed to be homemade)
Agilent E36-46A Power Generator
Agilent 8648B Signal Generator
Dish


we're curious about how to attatch all the components, and if we need
any other ones., thanks


-brian



John Miles wrote:
In article ,
says...

Hi, I'm part of an amateur radio astronomy group at a college trying to
get a dish on top of a roof to work. We have much of the equipment, but
are having trouble putting it together, as far as how exactly to hook
everything up. Would this be the right newsgroup to post to? Thanks.

-brian



Possibly; couldn't hurt to try. But if your questions are specific to
antenna work, you might have better luck in rec.radio.amateur.antenna.

-- jm

------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------

Brian Stephanik wrote:

Hi, I'm part of an amateur radio astronomy group at a college trying to
get a dish on top of a roof to work. We have much of the equipment, but
are having trouble putting it together, as far as how exactly to hook
everything up. Would this be the right newsgroup to post to? Thanks.

-brian
You might try looking over the sites on the following web ring.
http://a.webring.com/hub?ring=radioastro
If you need more information, you can email some of them who are
doing radio astronomy.
Lou AA9ZW

In article ,
says...
we currently have

ICOM 8500 Receiver
1420 MHz linear amp (company?)
21 cm(?) feed horn (assumed to be homemade)
Agilent E36-46A Power Generator
Agilent 8648B Signal Generator
Dish


we're curious about how to attatch all the components, and if we need
any other ones., thanks

Sounds like you're trying to listen for signals at the hydrogen line.
Probably would be helpful to be more specific about exactly what you're
trying to accomplish. Is an academic advisor available, or did the club
just get a bunch of (rather high-grade!) equipment donated to it with no
further guidance?

Hams involved in this type of work are often associated with the SETI
League (http://www.setileague.org/index.html). Not sure if there are
any SETI folks around the UDub or Seattle in general -- maybe you should
drop a line to and see if they can point you in the
right direction, so to speak. I'm not very knowledgeable about this
stuff myself, but it sounds interesting.

-- jm

------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------