Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi all,
I have, for many years, been making the RX80 amateur band receiver, as published by G3WPO in RadCom in 1980. OK, I know, I am a slow worker. This receiver has a main 3 to 4 MHz tuner module, switchable frequency convertors for the other bands, huff puff vco stabilizer, FM if, and more. After years laying dorment, I have decided to debug the radio, starting with the main tuner module, and I would like to find some data on the following parts:- 1. Toko KB4412 multifunction receiver IC. This is the heart of the receiver, the part I bought is labelled Uniden, not Toko. It is a 16 pin DIL chip, integrating the mixer, IF amplifier, and detector sections. 2. Plessey SL1621C AGC controller. This is an 8 pin DIL IC which generates the AGC control voltage derived from the audio signal. I have search the web high and low, and although I have found some references to these parts, I cannot find dats sheets for them. Can anyone point me to the right location, or have a paper copy? Many Thanks Pete |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|