Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Looking for some INFO on how to Stack Big Wheel Antennas ?
Operating Frequencies TX-421.250 to RX-439.250 ATV repeater. Would like to feed with equal lengths of coax from one Power Splitters if possible. I thing the stacking distance is around 16 inches. And There is something about right hand circular and left hand circular For proper phase. Thanks Dave |
#2
![]() |
|||
|
|||
![]() "Dr Dave" wvdave1st @hotmail.com wrote in message news:Sgyee.31930$r81.29132@trnddc02... Looking for some INFO on how to Stack Big Wheel Antennas ? Operating Frequencies TX-421.250 to RX-439.250 ATV repeater. Would like to feed with equal lengths of coax from one Power Splitters if possible. I thing the stacking distance is around 16 inches. And There is something about right hand circular and left hand circular For proper phase. If you send me a place where I can send you about 3 meg of files I will send you a scan of the stacking from an old VHF handbook for a 2 meter version. They recommend a 5/8 wavelength spacing. Also there is no right or left hand circular for the wheel. It is all just plane horizontal. de KU4PT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Stacking Big Wheel Antennas ? | Antenna | |||
Stacking Antennas | Antenna | |||
Stacking antennas | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave |