Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
"Boat Anchor" & Classic Equipment
/////////////////////////////////////////// Vacuum tubes under fire? Posted: 14 Feb 2018 08:24 AM PST https://forums.qrz.com/index.php?thr...r-fire.596668/ I just found this video on shipping vacuum tubes, any thoughts? /////////////////////////////////////////// Adjusting Hallicrafters SX-85 Main Dial and Band Spread Position Posted: 14 Feb 2018 08:16 AM PST https://forums.qrz.com/index.php?thr...sition.597955/ I just received a Hallicrafters SX-85 that I won in an auction. The Main Dial and Band Spread Dial are not in the home position when I turn the dials all the way to the left or right. Is it necessary to restring them to get them correct or is it possible to carefully force the dial into the proper position to match the capacitors position? Thank you /////////////////////////////////////////// Hallicrafters S-120 hum Posted: 14 Feb 2018 08:00 AM PST https://forums.qrz.com/index.php?thr...20-hum.599239/ It has a hum, I substituted capacitors for all the filter capacitors, replaced the diode. Still hums. The schematic I have found has differences, for example the 1000 ohm resistor is marked 500 ohms and I measured 20 ohms across it, resistors I have never found to go down. The 50C5 shows no pins 3 and 4 on the schematic but there are components connected to it. Ideas? View attachment 435077 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|