"G. Doughty" wrote

Anyone out there that tried a contact
with me, sorry. I was forever putting out QRS
and still not getting it all. I will be back though as I
cannot use phone when the baby is sleeping. The light
*tick-ticking* on the straight key doesn't disturb her
as much as me talking.

Next time you get the courage to fire up on the air, go to a frequency at
the lower part of most bands ending in "58" like 3558, 7058, 14058, or
21058. Usually you can find people there looking for slower Morse.

73, de Hans, K0HB

Wow! Thanks so much for the support. I thought I would get some negative
feedback but you guys are awesome. As far as setting up times, my daughter is
usually in bed by about 9pm. I get nervous though. That is what blew it the
first time I took the code. It's funny too, I find it difficult to send as
well, but I read a lot about how people find sending easier than receiving. I
actually have to write down what I want to send before I do it. Oh well,
practice makes perfect!!!


73
Greg

Greg Doughty wrote:

Wow! Thanks so much for the support. I thought I would get some negative
feedback but you guys are awesome. As far as setting up times, my daughter is
usually in bed by about 9pm. I get nervous though. That is what blew it the
first time I took the code. It's funny too, I find it difficult to send as
well, but I read a lot about how people find sending easier than receiving. I
actually have to write down what I want to send before I do it. Oh well,
practice makes perfect!!!

Sounds familiar, Greg! I'm a champion at "flying behind the plane", and
can really get frustrated if I make a mistake. That's my big problem, as
well as having trouble with bg noise - but I'm working on that too.

Yeah, we'll need to get together some evening. I'm good foro either 40
or 80.

- Mike KB3EIA -

"Greg Doughty" wrote in message
...
Wow! Thanks so much for the support. I thought I would get some negative
feedback but you guys are awesome. As far as setting up times, my
daughter is
usually in bed by about 9pm. I get nervous though. That is what blew it
the
first time I took the code. It's funny too, I find it difficult to send
as
well, but I read a lot about how people find sending easier than
receiving. I
actually have to write down what I want to send before I do it. Oh well,
practice makes perfect!!!


73
Greg


That's because we've all been there and done that. Early on I had a real
old-timer answer me and he must have been going at least 35wpm, probably
been doing code since radio began. After several requests, he got down to
what I could handle, about 10wpm, and stayed with me for a few minutes and
then gracefully said goodbye. I sensed that going so slow was a strain for
him but he still was willing to spend a few minutes with me.

Dee D. Flint, N8UZE

"Dee D. Flint" wrote in message
gy.com...

"Greg Doughty" wrote in message
...
Wow! Thanks so much for the support. I thought I would get some
negative
feedback but you guys are awesome. As far as setting up times, my
daughter is
usually in bed by about 9pm. I get nervous though. That is what blew
it
the
first time I took the code. It's funny too, I find it difficult to send
as
well, but I read a lot about how people find sending easier than
receiving. I
actually have to write down what I want to send before I do it. Oh
well,
practice makes perfect!!!


73
Greg


That's because we've all been there and done that. Early on I had a real
old-timer answer me and he must have been going at least 35wpm, probably
been doing code since radio began. After several requests, he got down to
what I could handle, about 10wpm, and stayed with me for a few minutes and
then gracefully said goodbye. I sensed that going so slow was a strain
for
him but he still was willing to spend a few minutes with me.

Dee D. Flint, N8UZE


It really is difficult for those able to copy above 30 wpm to slow down to
ten. Its not a macho thing, really.

Also now a days many folks use puters to send and readers to copy. Ive been
answered by someone going 20 when I called at 40 and they copied just fine,
and no ask for a QRS.

But, what I do is slow down if answered by someone slower than I was
sending. I feel that is courtesy and good operating practice.

Also be aware that this time of year the low bands are skipping out like
crazy. If your too close together you may not hear each other at night.

Dan/W4NTI

"Dan/W4NTI" w4nti@get rid of this mindspring.com wrote in message
ink.net...

"Dee D. Flint" wrote in message
gy.com...

"Greg Doughty" wrote in message
...
Wow! Thanks so much for the support. I thought I would get some
negative
feedback but you guys are awesome. As far as setting up times, my
daughter is
usually in bed by about 9pm. I get nervous though. That is what blew
it
the
first time I took the code. It's funny too, I find it difficult to
send
as
well, but I read a lot about how people find sending easier than
receiving. I
actually have to write down what I want to send before I do it. Oh
well,
practice makes perfect!!!


73
Greg


That's because we've all been there and done that. Early on I had a
real
old-timer answer me and he must have been going at least 35wpm, probably
been doing code since radio began. After several requests, he got down
to
what I could handle, about 10wpm, and stayed with me for a few minutes
and
then gracefully said goodbye. I sensed that going so slow was a strain
for
him but he still was willing to spend a few minutes with me.

Dee D. Flint, N8UZE


It really is difficult for those able to copy above 30 wpm to slow down to
ten. Its not a macho thing, really.

Also now a days many folks use puters to send and readers to copy. Ive
been
answered by someone going 20 when I called at 40 and they copied just
fine,
and no ask for a QRS.

But, what I do is slow down if answered by someone slower than I was
sending. I feel that is courtesy and good operating practice.

Also be aware that this time of year the low bands are skipping out like
crazy. If your too close together you may not hear each other at night.

Dan/W4NTI



Well in a contest, I've answered those going faster than I can without
expecting them to slow down as I've generally got the info by listening
through their response several times before I throw in my call. However I'm
relieved when they do slow down automatically as then I can verify what I
have when they answer.

I personally do not use a code reader as that limits me to answering
stations only when conditions are good, the signal is loud and the sending
consists of nearly perfectly formed code. I've worked stations in contests
that were so faint that I wasn't sure they got the exchange until they sent
the "TU". Another time, I was one of the operators at a special event
station and conditions were bad but several stations contacted us on CW and
I'm quite sure that a code reader would have failed as the static was high
and the signals distorted. One guy even sent us a thank you for working so
hard to copy him. He really wanted to make the contact as he was a Civil War
buff and we were commemorating the first Medal of Honor and it's winner. I
happened to be the one to work him and it meant a lot that he enclosed the
special thank you note.

Now when conditions are right for a code reader to work, yes, it beats me
hands down. But when conditions are less than ideal, I find that I do a
better job even though I don't work code enough to be really good at it.

For casual conversation instead of contesting, I'll need the other station
to slow down. 15 wpm is my comfort level as more than that I have a tough
time writing that fast (I'm working on head copy but that will take awhile
yet).

So Dan, if you come across me on the bands, slow down to my speed as I don't
and won't use a code reader. Maybe someday, I'll finally be good at it.

Dee D. Flint, N8UZE

ojunk (Greg Doughty) wrote in message ...
I get nervous though.

That's normal!

That is what blew it the
first time I took the code. It's funny too, I find it difficult to send as
well, but I read a lot about how people find sending easier than receiving.

Try this:

Disable the transmit part of your rig so that it doesn't put out a
signal, or use a code practice oscillator. Tune around for a CQ that
you can copy and have a "pretend" QSO, with you sending just to
yourself. Gets you used to doing the various things without actually
being on the air.

I
actually have to write down what I want to send before I do it. Oh well,
practice makes perfect!!!

Absolutely!

Remember that CW operating involves a whole set of skills, but Element
1 only tests one of them. The rest are left "as an exercise for the
reader".

73 es GL de Jim, N2EY

(N2EY) wrote in message . com...
ojunk (Greg Doughty) wrote in message ...
I get nervous though.

That's normal!

That is what blew it the
first time I took the code. It's funny too, I find it difficult to send as
well, but I read a lot about how people find sending easier than receiving.

Try this:

Disable the transmit part of your rig so that it doesn't put out a
signal, or use a code practice oscillator. Tune around for a CQ that
you can copy and have a "pretend" QSO, with you sending just to
yourself. Gets you used to doing the various things without actually
being on the air.

I
actually have to write down what I want to send before I do it. Oh well,
practice makes perfect!!!

Absolutely!

Remember that CW operating involves a whole set of skills, but Element
1 only tests one of them. The rest are left "as an exercise for the
reader".

73 es GL de Jim, N2EY

Jim, that actually make a whole lot of sense. Brian

Hey Greg, I know the stagefright thing. I passed my 5 wpm many years ago.
Wasn t good enough to pass 13 to get My General in '76. Dropped out of ham
pretty much until 2001. Got into SSB at first and late last year regained my
interest in CW. I am still trying to break the barrier of 13 wpm but can t
copy it on paper. Download the Koch Software Program by G4FON. It will play
text on random characters from your computer. Read the free book on CW by
N0HFF. Downloadable in pdf format. I am using the 200 most common words and
playing them alternatively at 15 and 20 WPM. I use CW Morse to convert to wav
files and record them on cd. At first 20 wpm was a total blur. Now I can pick
up about half the words at 20 wpm.
Some of the experts say not to pick up a key until you can copy 13 wpm. That
may be true.
My goal is to copy CW faster than I can send it. Listen to code faster than
what you can currently copy. The best challenge is the OM who sends a couple
of words per minute more than I am comfortable with. There is an order to the
progression of a qso, so it's relatively easy to pick up name, qth, signal,
rig, etc

Have fun learning 73's
Jerry

Very cool! I am now listening more than ever. I will occassionally go onto an
open freq and send CQ just to see if I can pick up a slow contact. But I send
s l o w. Great advice though about progression- What would cw be to me if I
just kept trying to find folks with 5wpm . . . I would always be at 5wpm! I
really appreciate the kind words.

Thanks
73
Greg