Hi, thought I post here for picture.

This is for them tin can caps..
I was pondering for a better way, something to cut them open instead of
hacking, mangling & denting them up.

Went looking thru my tools and came across this gadget. It's a plumpers
tool,
called a tubing cutter.

Gave it a try and it works super great! No dents, no rough cuts, easy to
use.
Just wanted to share this with you if you didn't know already.

Ridgid tools make this one. _JD_

Now why the devil didn't I think of that. Beautiful.

Good idea. I have a tubing cutter and have used it many times -- for other
things!

They make a clean, even cut and are quick and easy to use.

Phil Nelson

"_J D_" wrote in message
...

Went looking thru my tools and came across this gadget. It's a plumpers
tool,
called a tubing cutter.

DUH, (slaps head) and I have two of these! THANKS for thinking of it!!!!

John H.

"_J D_" wrote in message
...
Went looking thru my tools and came across this gadget.
It's a plumpers tool,
called a tubing cutter.

NNTP-Posting-Date: Thu, 06 Nov 2008 09:10:21 -0600
"HagstAr" wrote in
message:X-Usenet-Provider:
http://www.giganews.com NNTP-Posting-Host: 69.54.16.4 X-Trace:

DUH, (slaps head) and I have two of these! THANKS
for thinking of it!!!!
John H.

Welcome all... And the best thing (besides my moment of fame :P) it's so
easy to use.
Just "slowly" increase blade pressure after every revolution. Don't try
to chop it off in 1 pass.
_J D_

_J D_ wrote:
"_J D_" wrote in message
...
Went looking thru my tools and came across this gadget.
It's a plumpers tool,
called a tubing cutter.

NNTP-Posting-Date: Thu, 06 Nov 2008 09:10:21 -0600
"HagstAr" wrote in
message:X-Usenet-Provider:
http://www.giganews.com NNTP-Posting-Host: 69.54.16.4 X-Trace:

DUH, (slaps head) and I have two of these! THANKS
for thinking of it!!!!
John H.

Welcome all... And the best thing (besides my moment of fame :P) it's so
easy to use.
Just "slowly" increase blade pressure after every revolution. Don't try
to chop it off in 1 pass.
_J D_


And don't use one with a dull blade!

-ex

And don't use one with a dull blade!

Or a cheap one with skewed rollers.

Alan

Or an even cheaper one with no rollers at all. My dad had one of those,
it worked OK on copper tubing that didn't have to look good.

Alan Douglas wrote:
And don't use one with a dull blade!

Or a cheap one with skewed rollers.

Alan

--
Jim Mueller

To get my real email address, replace wrongname with dadoheadman.
Then replace nospam with fastmail. Lastly, replace com with us.