Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi Guys
I need to add an ext speaker jack to my pro-2045. I have the right jack from RS but don't know how to wire it to cancel the built in speaker. thx bob |
#2
![]() |
|||
|
|||
![]()
steelguitar wrote:
Hi Guys I need to add an ext speaker jack to my pro-2045. I have the right jack from RS but don't know how to wire it to cancel the built in speaker. thx bob Not to flip you off Bob, but ask the folks at RS. The wire(s) that go to the speaker will be rerouted to the new jack. New wire(s) will go from the jack to the speaker. There is a switch built into the jack that will disconnect the speaker when a plug is inserted into the jack. If I had the jack in my hand for us both to look at the above would be clear as a bell. |
#3
![]() |
|||
|
|||
![]()
Thanks, Jim
I got it so the built in speaker works but when I plug the ext. speaker in, nothing works! bob Jim wrote: steelguitar wrote: Hi Guys I need to add an ext speaker jack to my pro-2045. I have the right jack from RS but don't know how to wire it to cancel the built in speaker. thx bob Not to flip you off Bob, but ask the folks at RS. The wire(s) that go to the speaker will be rerouted to the new jack. New wire(s) will go from the jack to the speaker. There is a switch built into the jack that will disconnect the speaker when a plug is inserted into the jack. If I had the jack in my hand for us both to look at the above would be clear as a bell. |
#4
![]() |
|||
|
|||
![]()
SHORTED AT YOUR NEW PLUG
|
#5
![]() |
|||
|
|||
![]()
Got it
thx bob steelguitar wrote: Thanks, Jim I got it so the built in speaker works but when I plug the ext. speaker in, nothing works! bob Jim wrote: steelguitar wrote: Hi Guys I need to add an ext speaker jack to my pro-2045. I have the right jack from RS but don't know how to wire it to cancel the built in speaker. thx bob Not to flip you off Bob, but ask the folks at RS. The wire(s) that go to the speaker will be rerouted to the new jack. New wire(s) will go from the jack to the speaker. There is a switch built into the jack that will disconnect the speaker when a plug is inserted into the jack. If I had the jack in my hand for us both to look at the above would be clear as a bell. |
#6
![]() |
|||
|
|||
![]()
steelguitar wrote:
Thanks, Jim I got it so the built in speaker works but when I plug the ext. speaker in, nothing works! bob Check the wiring for the plug and external speaker for continuity, but not shorted. It that checks outm then most likely you mis-wired the jack. It could be you reversed the _input_ and the _output_ connections of the built in switch. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
cb speaker wiring | CB | |||
$50+ speaker boxes ... why do people buy these? | Homebrew | |||
FS: PSC-10 Hammarlund Speaker for HQ-129X | Boatanchors | |||
Speaker for Motorola Saber -- how to use? | Equipment | |||
Speaker for Motorola Saber -- how to use? | Equipment |