Hey all,

I'm having a helluva time programming in trunked systems. I've tried
following the manual verbatim but it have had zero luck. Can anybody
recommend a "Programming Trunk Systems on RS Scanners for Dummies" type
site or something similarly helpful?

I have been able to get frequency listings, talk group IDs, and the
trunking system type but not doing something correctly. I'll keep
plugging away at this and check in here for a scanner savior


THanks,

OM

OregonMike wrote:
Hey all,

I'm having a helluva time programming in trunked systems. I've tried
following the manual verbatim but it have had zero luck. Can anybody
recommend a "Programming Trunk Systems on RS Scanners for Dummies" type
site or something similarly helpful?

I have been able to get frequency listings, talk group IDs, and the
trunking system type but not doing something correctly. I'll keep
plugging away at this and check in here for a scanner savior

Have you tried Win97 software for it?

http://www.starrsoft.com/software/win97/default.asp

Go ahead and spend the money for it (and a cable):

http://www.starrsoft.com/software/Wi...es/cables.html

It will turn programming from a chore into a pleasure.
--
Bo Williams -
http://hiwaay.net/~williams/

Thanks for the insight.

OM

Radio Scrap should give it away.



"OregonMike" wrote in message
ups.com...
Thanks for the insight.

OM

TNT wrote:
Radio Scrap should give it away.

It's certainly not very pleasant to program the trunking manually in an
RS/GRE scanner, that's for sure.
--
Bo Williams -
http://hiwaay.net/~williams/

"Bo Williams" wrote in message
...
TNT wrote:
Radio Scrap should give it away.

It's certainly not very pleasant to program the trunking manually in an
RS/GRE scanner, that's for sure.
--
Bo Williams -
http://hiwaay.net/~williams/

Ha! If you think RS/GRE is difficult, try manually programming Uniden's new
BCD396T!

Bill Crocker

"TNT" wrote in message
. ..
Radio Scrap should give it away.


Win97 is not Radio Shack's software. It's not theirs to give away.

Bill Crocker

On 26 Nov 2005 17:02:17 -0800, "OregonMike"
wrote:

I have been able to get frequency listings, talk group IDs, and the
trunking system type but not doing something correctly. I'll keep
plugging away at this and check in here for a scanner savior

Are you sure you're marking both the bank and all the channels as the
trunking type, not FM?

On Tue, 29 Nov 2005 20:32:17 -0500, Al Klein
wrote:

On 26 Nov 2005 17:02:17 -0800, "OregonMike"
wrote:

I have been able to get frequency listings, talk group IDs, and the
trunking system type but not doing something correctly. I'll keep
plugging away at this and check in here for a scanner savior

Are you sure you're marking both the bank and all the channels as the
trunking type, not FM?


Hey Al,

I did, indeed, have the banks and channels marked as trunking but it
wasn't work. We may be able to chalk it up to lackluster reception
strength on the trunking system I was trying to receive whle down in
Oregon. Though, admittingly, I believe I didn't have everything
program in properly. I finally figured out the basic steps of
programming in the data channel for Motorola Systems and then manually
entering in the Talk Group #'s and AlphaNumeric tags. The manual could
have been quite a bit more insightful and less ambiguous and
confusing. I finally googled my way to a couple of sights with some
good, basic facts that pushed me forward much quickly than the manual
would ever do.

OM

On Sun, 04 Dec 2005 17:58:29 -0800, OregonMike
wrote:

The manual could
have been quite a bit more insightful and less ambiguous and
confusing. I finally googled my way to a couple of sights with some
good, basic facts that pushed me forward much quickly than the manual
would ever do.

Neither the Uniden or GRE manuals are worth much if you don't already
know how to use the scanner.