According to the manual, you can not change the preset shortwave stations
stored in your receiver memory. You can however, store programmed memory
into the blank spaces in your memory pages.

If you set your radio to Page 1, position 1, you should see Australia and a
freq of 5.995

To do this, hold down the "page" button until the page number on the display
begins to flash. Then use the up and down buttons to move to the page you
want. Once you have the page you want, hit the enter key and your radio
will be set to this page and freq.

Example: Hit SW, HOLD PAGE until page number flashes, use up arrows to move
to page 7, then hit enter. Now the page numbe ris not flashing, so hit the
#3 on your touchpad and you will be on a freq of 9745 in the 31m band.

http://support.radioshack.com//suppo...ns/swave-0.htm

The above website can give you more information and a toll free number to
call if you have misplaced your DX398 manual.

73



wrote in message
oups.com...
I live on the west coast of the US. I have a DX-398 that is about 6
years old. Recently I changed my "world" time from London to New York,
leaving my home time as Los Angeles. The trouble being that after I
made the change, I got a completely different station list (I get DW,
BBC --D--, RFI, etc.) I would like to know how to set this list back
to its factory defaults.

I have tried:

* setting "world" time back to London
* using the "reset" feature
* Taking out the batteries

I would like to know what else I can do.

Thanks in advance for any help you can provide.