Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
"dingus" wrote in
ups.com: I recently bought a yaesu FT100D and had it modified so i could transmit on the marine VHF bands. After the modification i cannot transmit on the SSB ham bands. I unable to contact the guy that did the modification. Any suggestions as to what may be the problem? Yes. You're an appliance operator. sc |
#2
![]() |
|||
|
|||
![]()
On Mon, 19 Jun 2006 23:14:14 +0000, Slow Code wrote:
"dingus" wrote in ups.com: [quoted text muted] Yes. You're an appliance operator. So,.... what kind-a car did you build to drive around in? |
#3
![]() |
|||
|
|||
![]()
yea right wrote:
On Mon, 19 Jun 2006 23:14:14 +0000, Slow Code wrote: "dingus" wrote in ups.com: [quoted text muted] Yes. You're an appliance operator. So,.... what kind-a car did you build to drive around in? Funny you should mention that. I, myself have built two Mercedes from the pavement up. One a 190SL which I still have at my place in Texas, the other is an S-Class 280, which I sold some years ago. Besides those two, I've also built two of my three Studebakers, and a BMW 2002. You may find that a number of members of this group are as adept with a wrench. But the point intended above is not that one must build one's radio in order to be a fine ham, but that one must be a good technician, familiar with, and posessed of a working knowledge of, the circuitry of the operator's rig of choice, in this case a Yeasu FT100-D. Which would have obviated the original question as posted here. In other words, If you're going to key up on the bands, know enough about the radio to know 1) that it's working correctly and within the standards of good amateur practice, and 2) how to at least begin an undertaking like correcting a mod that produces undesired performance. There's nothing wrong with buying a commercially produced radio. But if you're going to assume the mantle of responsibility that goes with keying the mic, know something about the damned thing. |
#4
![]() |
|||
|
|||
![]()
I own an early 1960's Mercedes Benz four cylinder diesel enging.I bought
it from J.C.Whitney company.I was going to put it in a small 1967 International walk in van I used to own and make a camper out of the van.But like most big ideas I get,I never got around to doing it.Like my half acre of land I bought in North Florida.I had the idea I would put some second hand trailers on there and rent them out to some girls at University of Florida in Gainesville.Me and my bright ideas. cuhulin |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Yaesu FT-50RD Transmit Problem | Equipment | |||
Yaesu FT-707 problem | Homebrew | |||
yaesu ft 8100 problem | Equipment | |||
Yaesu FT-90R Current on Transmit | Equipment | |||
FS, Yaesu 767 Hf Rig, No Transmit | Swap |