David wrote in
:

Anyone know what has happened to rec.radio.amateur.homebrew group ?

The posts stopped a couple of days ago .

Thanks

Regards

David



Well I knew this was going to happen. As ham radio requirements continue
to get dumbed down and people only understand how to use a microphone,
groups like homebrew are going to dry up.

SC

"
Well I knew this was going to happen. As ham radio requirements continue
to get dumbed down and people only understand how to use a microphone,
groups like homebrew are going to dry up.

SC

Up 'til now I have not read your posts- just subject lines.
From them, I gather you are something of a ham radio guru. May I ask a few
qualifying questions?

1. Do you have a code proficinecy certificate - if so at what speed? If not,
how fast can you copy? I would hope at least in excess of 20WPM, given your
posts.

2. Do you build/design most or any of your equipment?

3. Have you published in any of the amateur journals?

4. Are you active in perhaps EME or microwave or other modes that require
at least a modicum of technical expertise?

I will admit that I, and the amateurs I congregate with can answer yes many
times over to the above ( oh yeah, proficiency at 25WPM)
but you don't find any of us ranting about the current state of exams.
Those that wish to use code may, and those that enjoy designing/building
may. Those that don't may want to in the future with proper Elmering.

Looking forward to your response,

Dale W4OP

Anyone know what has happened to rec.radio.amateur.homebrew group ?

The posts stopped a couple of days ago .

Thanks

Regards

David


Either your ISP's usenet server is losing them, (sometimes they drop
groups intentionally), or something else is goofy with the usenet
handling of this group. I just went to check that group and it came up
with no new postings. However, I then reloaded all articles and it showed
a several postings made yesterday and today. So, bottom line, it IS still
working.


Ed K7AAT

Dale Parfitt wrote:

"

Well I knew this was going to happen. As ham radio requirements continue
to get dumbed down and people only understand how to use a microphone,
groups like homebrew are going to dry up.

SC


Up 'til now I have not read your posts- just subject lines.
From them, I gather you are something of a ham radio guru. May I ask a few
qualifying questions?

1. Do you have a code proficinecy certificate - if so at what speed? If not,
how fast can you copy? I would hope at least in excess of 20WPM, given your
posts.

2. Do you build/design most or any of your equipment?

3. Have you published in any of the amateur journals?

4. Are you active in perhaps EME or microwave or other modes that require
at least a modicum of technical expertise?

I will admit that I, and the amateurs I congregate with can answer yes many
times over to the above ( oh yeah, proficiency at 25WPM)
but you don't find any of us ranting about the current state of exams.
Those that wish to use code may, and those that enjoy designing/building
may. Those that don't may want to in the future with proper Elmering.

Looking forward to your response,

Dale W4OP



Good luck Dale.

His type has a single point of aim, and a single point of failure. He
probably has no idea how to make a power divider for 432 or a sequencer
for an EME station. Hell, probably has no idea what either one is.

Some people have a single point of view on what it takes to be a capable
amateur radio operator. And they could do it with a spark gap
transmitter. And couldn't use much of anything more advanced.

tom
K0TAR

Dale Parfitt wrote:

"

Well I knew this was going to happen. As ham radio requirements continue
to get dumbed down and people only understand how to use a microphone,
groups like homebrew are going to dry up.

SC


Up 'til now I have not read your posts- just subject lines.
From them, I gather you are something of a ham radio guru. May I ask a few
qualifying questions?

1. Do you have a code proficinecy certificate - if so at what speed? If not,
how fast can you copy? I would hope at least in excess of 20WPM, given your
posts.

2. Do you build/design most or any of your equipment?

3. Have you published in any of the amateur journals?

4. Are you active in perhaps EME or microwave or other modes that require
at least a modicum of technical expertise?

I will admit that I, and the amateurs I congregate with can answer yes many
times over to the above ( oh yeah, proficiency at 25WPM)
but you don't find any of us ranting about the current state of exams.
Those that wish to use code may, and those that enjoy designing/building
may. Those that don't may want to in the future with proper Elmering.

Looking forward to your response,

Dale W4OP

Dale Parfitt wrote:

"

Well I knew this was going to happen. As ham radio requirements continue
to get dumbed down and people only understand how to use a microphone,
groups like homebrew are going to dry up.

SC


Up 'til now I have not read your posts- just subject lines.
From them, I gather you are something of a ham radio guru. May I ask a few
qualifying questions?

1. Do you have a code proficinecy certificate - if so at what speed? If not,
how fast can you copy? I would hope at least in excess of 20WPM, given your
posts.

2. Do you build/design most or any of your equipment?

3. Have you published in any of the amateur journals?

4. Are you active in perhaps EME or microwave or other modes that require
at least a modicum of technical expertise?

I will admit that I, and the amateurs I congregate with can answer yes many
times over to the above ( oh yeah, proficiency at 25WPM)
but you don't find any of us ranting about the current state of exams.
Those that wish to use code may, and those that enjoy designing/building
may. Those that don't may want to in the future with proper Elmering.

Looking forward to your response,

Dale W4OP



BTW, you might be interested to know that VE4MA worked a couple of the
NLRS (Minneapolis) group on 10 Gigs Saturday night on rain scatter. 620
kilometers on about 8 watts CW. Maybe good enough for NBFM, but no one
bothered.

tom
K0TAR

Try rec.crafts.homebrew

wrote:
Try rec.crafts.homebrew
well steves back wonder if he was on a 7 day paper and talked his way
then had to realease that pent angst here

curmudg@eon (Curmudgeon) wrote in
:

On 20 Sep 2006 16:17:56 -0700, wrote:

Whenever he disappears, I just figure he's been picked up again. No
telling what kind of excrement they had him eating in the pokey.
Perhaps his own.

You're simply projecting your own experience with the Cincinnati
Police Department. I guess you didn't like their jail much.


BuTT he made a lot of new friends.

SC

Slow Code wrote:

gay bashers are not welcome anywhere that is why they use fake names
like Slow Code