Ok, I thought I was out of the radio biz but I keep finding things stuffed
in every closet and corner!

FS/FT, etc... Shipping included is ConUS only, programming available.

RADIOS:

Mot CDM1550LS+ UHF 403-470MHz, 30w,
AAM25RHF9OP5AN, trunking and 18 conventional channels.
MDC, MDC signaling, voice record, etc. 10-button front, excellent cond.
Radio, older maxtrac mic and bracket screws only.
Ask about a new power cord. $300 shipped.

Mot GM300 45w, UHF 440-470ish, M44GMC20D3AA, exc. condition,
8ch with 16ch codeplug hack. I can leave it 16 or put it back to 8ch.
Radio and bracket screws only. exc. cond. $135 shipped.

Mot Maxtrac, 45w, UHF 440-470ish, 2channel. 5pin board. Label missing.
radio is old and buttons yellowed. Dirty, but no damage. Has tape labels on
bottom cover. Radio only. $70 shipped.

Mot SP50 UHF, 450-470MHz, 10ch. full size. P94YQT20G2AA,
exc. condition, stubby antenna. Slow charger and two 1200mAh batteries
with 90% life. A couple scuffs of paint on the edges. Belt clip. $130
shipped.

Mot SPIRIT VHF, three radios, one rapid charger. 151.625 red dot.
1 spirit sv12, two ch unit, 151.625 and 154.600 I believe. Plain belt clip.
1 spirit sp10, one ch unit, batt door painted red, spring belt clip.
1 spirit II, one ch unit with sq and vol knobs. Plain belt clip.
All three have decent to good batteries and PL board. [at least 2 of 3
should have PL.] All in exc cond. with no damage. $90 shipped.

Mot MT1000 UHF 8 or 16ch. H44GCU7180AN, 438-470MHz, QCII,
Scan, etc. Old and dirty but working great. Someone cut down the
channel knob, removing the top slender portion. Rubber buttons missing, but
blister pads work correctly.
Also has the sad remnants of a sp/mic hanging from it. Head is ok, cord is
shot, but it works.
Slender antenna, beltclip and black radius rapid charger. $65 shipped.

Yaesu FT-50RD, UHF/VHF with super-wideband mods. NO GAPS in RX.
FM/AM/FMw, PL/DPL, tone search, voice record, etc, includes Radio, 2
aftermarket batts with vertex spring belt clips, orange rubber body bumper,
speaker/mic, ADMS programming cable/kit, charger, Vertex CA-15 drop-in
charger cup, COMPLETE!
$160 shipped.

ACCESSORIES:

SP50 DTMF front housings. Complete/electronics/buttons/speaker, flex, etc,
for tall 10ch radios. NEW in plastic. Six units. $25ea plus shipping, or
$120 shipped for all.

SP50 Slow charger. Charge or make a programming cable. $14 shipped.

MT1000/HT600/P200 pocket chargers. 3 units, a little dusty and they've
had the transformers replaced/spliced. $12 shipped.

VISAR Spring belt clip/holster, $18 shipped.

GP300 or P1225 HTN9702A slow charger? $12 shipped.

OTHER ITEMS:

CPI Radio Phone Patch desk unit. Model 724. Not a clue on this one...
looks like a tone remote, but has speaker, connect/off switch, auto/man
switch plus tx and vol. controls. Plugs into 110v and radio inputs. About
9"x7" and 4" high. Has 110 cord, radio wiring, labeled, etc. $25 plus
shipping.

FM Broadcast band recorder/transmitter. Just guessing, it's about 100mW. It
will transmit internally recorded audio to an FM car radio for about a city
block. Freq range appears to be about 87-90MHz.
It has a small record/transmit toggle, freq adjustment knob, mic and tx LED
on the front. Simply toggle to record and speak a 40 second message then
toggle to TX for an everlasting audio loop. Recorded audio quality seems to
be 8bit, so telephone or less quality. Also has some background hum, but
audio is loud and clear.
9v battery connection on back. Has FCC labels, etc. Measures about 6x8x2.5
inches. Looks like a project box, but has a warranty void sticker, etc. ??
Now... what good is all that? I dunno, but here's some ideas:
Put a 9v battery on it and use it in a car you want to sell. Post the FM
freq for others to tune in and hear about the car while they sit at the
light.
Sell your house with it and give window shoppers something to listen to
while sitting outside the place.
Use for your church, tx memos, messages or events to those in the parking
lot, or driving by. That kind of thing. $55 shipped.

TRADES I NEED:

iCOM V8000 in excellent condition, complete.

Transcrypt or similar voice inversion scrambler board for HT1250 or icom
V8000, easily changed code type. Direct plug in only.

Yaesu VX-6 radio with accys.

Handheld scanner with IF tap jack. NOT looking for a scan-king. One of those
small 69bux jobs will do.

GE MASTRII VHF cont. duty PA or whole repeater.

SMALL 100w dry dummy load for VHF/UHF, preferring N-connector.

And as always, cash works too.

thanks, and email for more info.
rb