Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Looking to Sell/Swap the following:
Motorola Radius P-100 VHF Handheld - Model:H43QPU7120BN 2 Channel, DTMF Keypad, 150.8 through 162.0 MHz... Hi/Lo Power selectable from top-mounted toggle switch Currently on 151.680 and 158.755 MHz.. Good Cosmetic Condition - No engraving on case or battery - Paint Dots on top for power position (high), Channel (2) and Squelch Position (Speaker Off Icon) - With Screw-In Rubber Duck; also in good cosmetic condition. Motorola Desk Top Drop- In Battery Charger Model:NTN4881B Motorola Battery: 10V NiCad - Model: NTN5451B Battery does not hold a charge. $50.00 plus shipping ************************** Motorola Drop-In Charger: Standard Charger HTN9046B - 16 hour charge cycle. With Motorola Wall Wart Model ICC-6-375 - 18 VAC @ 1.8VA $20.00 Plus Shipping *************************** (2) Regency Desktop Battery Chargers - Model: BC-45.... Output 12.8VDC @ 1 Amp MAX. With Charge and Ready Indicators - $25.00 each - Plus Shipping ************************* (8) New Relm Replacement Antennas for Relm WHS-150 VHF Handheld. Approximately 6" Tall and 3/8" OD $10.00 each ************************* (1) New BP007 Battery for Relm WHS-150 - Still in plastic wrapping.. 10.8 VDC @ 700 mAh Nicad Battery. $26.00 Plus Shipping ************************ (1) Relm WHS-150 - 5 Watt - 16 Channel VHF Handheld transceiver, with belt clip and (2) BP007 10.8 VDC @ 700 mAh Nicad Battery. With Programming Manual copy. Field Programmable. Scan, Priority, Tone Squelch, Hi/Lo power selectable, DTMF Keypad - With Wall wart charger (needs new wire and coaxial end. Charger works, and has sufficient pigtail to connect new charging cable. Battery seems to be good - holds a charge and lasts well under the moderate usage I have given it - coaxial jack inside battery is loose and has to be manually aligned before inserting charger plug. (I have been charging it with an old Alinco HT Charger). Other battery is new and has just received it's first charge... Mis-matched Volume and Squelch knobs. Includes 3 new display panel trim pieces and 2 new Channel knobs. Perfect HT for those times when you want a Type Accepted rig that can go down to ham freqs, while still covering Marine VHF Band or VHF Business band needs. (See new battery listed above). $150.00 Plus shipping ************************** (1) GE "Spring Whip Antenna - 132 -174 MHz - NIB box with Cutting diagram for tuning to your frequency in this range. GE Part Number: 19B219888P1 $10.00 Plus Shipping ************************* (2) Relm Model RFH252NB - 2 Channel VHF Mobiles. (tested at 20 to 22 Watts out on Bird 4304A) Currently on (radio 1) F1=154.370 MHz, F2=155.385 Mhz - (radio 2) F1=158.760 MHz, F2=155.805 MHz.. With Brackets, Power Cords and Mics and Manuals $45.00 Each Plus Shipping ************************** (1) Relm RH256NB - 16 Channel - Keypad Programmable Mobile (Has problem in output - There are two 1 uH Chokes that are charred (Relm Part Number 1803-3268-210) - With Bracket - No Mic - With Instruction Manual and Copy of Programming Manual. $40.00 Plus Shipping *************************** (2) Keypads for RH256NB Mobile - NOS repair Parts - $10.00 each Plus Shipping *************************** (4) Relm Model SLV40 - 6 Channel 40 Watt VHF Mobile Transceivers - Programmable 2 are in the original box and packaging with New Power Cable, New Microphone, New Bracket, Manual, New Speaker (Radios do not match the serial number on box - look used, but in great shape and seem to be working properly.. $75.00 each Plus Shipping On the other 2 : 1 has Mic, New Power Cable, Bracket, Manual - No Speaker $60.00 Plus Shipping 1 Has Bracket and Power cord only - No Mic, No Speaker, No Manual $45.00 Plus Shipping ************************** (1) Relm SLU25 - 6 Channel - 25 Watt UHF Mobile Transceiver - Programmable - With used Bracket and Power Cable - No Manual, No Mic, No Speaker $55.00 Plus Shipping *************************** (1) Relm Model SMV4099 - 99 Channel - 40 Watt VHF Mobile Transceiver with Instruction Manual - Programmable - Display has just been replaced - $100.00 Plus Shipping *************************** (7) Relm PT46B - Handheld UHF, 6 Channel, 4 Watt Transceivers with BP700 (7.2 VDC 700 mAh) Battery pack , Belt Clip and Antenna. $55.00 each Plus Shipping ***************************** (5) Relm PT46B - Handheld UHF, 6 Channel, 4 Watt Transceivers with Antenna - no battery, no belt clip... $35.00 each Plus Shipping ****************************** (8) Relm PT56B - Handheld VHF, 6 Channel, 5 Watt Transceivers with BP700 (7.2 VDC 700 mAh) Battery, Belt Clip and antennas - $50.00 each Plus Shipping *************************** (6) NEW BP700 (7.2 VDC 700 mAh) Battery Packs - Still in original packaging $30.00 each Plus Shipping. (these will be offered with the 5 PT46B units that don't have batteries first, then made available as spares. ****************************** On the units that come with batteries - Most of the batteries are holding charge. Out of the lot of 18 used batteries; 2 wouldn't hold a charge, 3 didn't hold up to sustained use after the initial charge ( I am cycling them now to see if that condition improves) and 1 had one of the plastic "slide rails" broken. I haven't tried to actually duplicate usage over a sustained time, but can confirm that none of the batteries have gone dead sitting after being charged in a 5 to 7 day period. These HTs are programmable, hi/lo power switchable (mechanical), Tone squelch and , busy channel lockout options. All seem to work OK. Good overall cosmetic condition; some have IDs painted on them, non have any engraving on the case or batteries (that I have seen). I have one (1) charger with the lot, and it will go when all are spoken for. It is a Relm Model BCS Battery Charger and it uses a wall wart that outputs 12 VDC @ 80mA. It is a drop in desktop base with detachable wall wart. Looks a lot like an old Icom charging base, but I am not sure of the contact positions being correct of the voltage requirements being the same.. I also have one of each that have bad internal Speakers. I have them patched with a temporary fix, but don't know how long it will last. They are available without battery or belt clip for $30.00 each Plus Shipping When the smoke clears, I may have some extra belt clips for the ones that don't show them included.. ***************************** BK Precision - Model 820 Capacitance Meter - Manual Ranging Capacitance Meter 4 Digit LED Display, 10 Ranges 999.9pF to 999.9 mF. Battery operated by 4 "C" cells - provisions for AC adapter operation, or for use with NiCad batteries. Capacitance meter only; no NiCads, Charger/AC Adapter or Manual. Seems to be in good operating condition. $50.00 shipped CONUS *************************** BK Precision Model 177/V-95 Vacuum Tube Voltmeter. With Instruction Manual and Parts List / Schematic Diagram. With BK Precision AV-2B High Voltage Probe. $40.00 plus shipping *********************** BK Precision Model 283 3 1/2 digit - Digital Multimeter $45.00 Plus Shipping ********************* BK Precision Model 2009 MTS TV-Stereo Generator - $45.00 Plus Shipping ********************* Data Precision Model: 1455 - Bench Muiltimeter with AC or Rechargeable Battery Power options. Battery holding charge. With Manual - $30.00 Plus Shipping ********************* Data Precision Model: 258 Multimeter - Rechargeable - with leads and charger - Needs display $5.00 plus shipping ********************* (8) AIM 15-5010 Coaxial Switches - Push button model designed for 2-75 OHM inputs to one TV Set Antenna system and cable system to one TV Set. 90 dB isolation. Push a button to change Signal Source. For VCR - CATV - MATV - TV - All "F" Connectors. In original plastic Bag with Double Sided Tape and Mounting Screws.. $5.50 Each Plus Shipping ******************** ATV Research - Micro-Verter II RF Interface. Tuning Range Channels 7 - 10. Factory Set to Channel 7. Rear-Mounted "F" connectors for: Audio In, Video In, RF Out. 110 VAC Operated.. $35.00 Plus Shipping ********************* ATV Research - Micro-Verter III Television Modulator. Factory Set to Channel 5. Front access to trim-pot based Level Controls for Audio, Subcarrier and Video. Rear-Mounted RCA Phono Jacks for Audio In and Video In - Rear-Mounted "F" connector for RF Out. 110 VAC Operated.. $50.00 Plus Shipping ********************* Listing will be revised and updated as items are spoken for. Still have more to add... I will be taking a load to the Jacksonville, FL hamfest in October, listing on Newsgroups until then.. Thanks for reading If these prices are not reasonable, please let me know, with a link to current pricing for these models in the used market. Shipping to be paid by buyer. I will pack these items myself, so Shipping will be actual costs - or costs estimated from on-line calculator based on shipping weight and container size to your Zip Code. I will not be using a drop-off shipping depot, so shipping will be as reasonable as I can make it. I can accept PayPal, money order, or personal check (personal check will delay shipping until check clears). I can provide references in the form of eBay feedback. I have been buying and selling in the newsgroups for at least 5 years; on CompuServe and Fidonet for 5 years before that. I would consider swapping for high-end Nextel cell-phones; Current models or late models that are clear for activation (i90c, i95cl. i58, 188, i760, etc.). Other consideration given for good quality PDA and accessories that can be used for mobile data logging or data acquisition. Also looking for Icom IC-2800 dualband with separation kit and good laptop with working USB and Serial ports as well as sound blaster compatible sound capabilities. Other electronic items considered for trade. email responses to |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
New Candidate for 'Youngest Extra' | Policy | |||
New ARRL Proposal | Policy | |||
The Pool | Policy | |||
Response to "21st Century" Part One (Code Test) | Policy | |||
Question for the No coders : post from Kim | Policy |