Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() Nye Viking MB-V-A tuner info: The MB-V-A Nye Viking tuner will handle power in excess of 3000 watts PEP sideband and CW with a continuous rating of 1500 watts into loads between 40 and 2000 ohms impedance with an SWR reading below 1.1:1. A 3KW trifilar wound broadband balun provides balanced output to twin lead feeders 100 to 1000 ohms resistance and unbalanced output impedance down to 20 ohms at the Coax "A" and "B" outputs. The unit features 2 1/4" tuning knobs with 4" dials; a 1 to 25 vernier readout over 360 degrees on the variable inductor tuning plus 360 degree readout on the variable capacitor. The extra heavy gauge aluminum cabinet provides adequate shielding. The input connector from the transmitter or linear amplifier is a standard SO-239 UHF connector and the output terminals are high voltage porcelain feed-thrus and SO239 UHF coax connectors for 50 or 72 ohm coaxial cables. Frequency range is 3.5 to 30 MHz with limited coverage of the 1.8-2.0 band segment The size is 14 1/2" wide, 6 3/4 high and 12 1/4" deep. Shipping weight is 20 pounds. The unit is in very good condition.... 9 out of 10..... You can see more information at www.nyeviking.com . I am asking $525.00 for the unit. Although I would prefer local pickup or meet you within 50 miles of my QTH (Landing, New Jersey, I would consider shipping if you were to pay for shipping and insurance. Thanks es 73 Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |