I have for sale in excellent condition with the manual an MFJ-949E
antenna tuner...Full 1.8-30MHz Operation Custom designed inductor
switch, 1000 volt tuning capacitors, Teflon insulation washers and
proper L/C ratio gives you arc-free no worries operation with up to
300 Watts 1.8 to 30 MHz. Tunes any Antenna Tunes out SWR on dipoles,
verticals, inverted vees, random wires, beams, mobile whips, shortwave
receiving antennas.... Nearly anything! Use coax, random wire or
balanced lines. Has heavy duty 4:1 balun. Custom Inductor Switch The
inductor switch is the most likely component to burn up in any antenna
tuner. MFJ\'s inductor switch in the MFJ-949E was custom designed to
withstand the extremely high RF voltages and currents that are
developed in your tuner. 8 Position Super Antenna Switch Lets you
select two coax fed antennas, random wire/balanced line or built-in
dummy load through your MFJ-949E or direct to your transceiver. More
hams use MFJ-949s than any other antenna tuner in the world! Has
MFJ\'s full size 3 inch lighted Cross Needle Meter ....Lets you easily
read SWR, true peak forward and average reflected power simultaneously
on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC
or 110 VAC with optional AC Adaptor QRM-Free PreTune MFJ\'s QRM-Free
PreTune lets you pre-tune your MFJ-949E off-the-air into it\'s
built-in dummy load! Makes tuning your actual antenna faster and
easier. Plus much more! Full size built-in non-inductive 50 Ohm dummy
load, scratch-proof Lexan multi-colored front panel, superior cabinet
and construction and more!................. I will take $95 plus
shiping.....WZ1U Steve / Lakeville, Ma.

you can download the manual at mfj's homepage...
I have one of these. Great matcher, I run 500 watts into it, and for 2
years
have had no problems.
The dummy load is great for tune-ups and such.
I highly recommend it